[Company Logo Image]  

Home Up

Supported Equipment

 

The following List shows the current supported equipment . This List shows all equipment types supported by ARK RF software products. Equipment types are only relevant to particular products.

Many models from the same manufacturer will have compatible GPIB command sets. If a model isn’t listed, try selecting a similar model.

Many manufacturers provide native and emulated instruction sets. i.e. most power meters provide an HP437 or HP438 compatibility mode. If a driver is not listed it maybe worth investigating if the instrument can emulate one of the supported drivers.

The list covers the more common instruments. Drivers are added (as a free service) as and when required, to request a driver for a particular piece of equipment please email. Expect to provide the GPIB syntax information from the instruments manuals.

Signal generators

Hewlett Packard/Agilent
8647/48
8663
83751/2/A/B
8350B
ESG
Rohde and Schwarz
SMIQ Most R&S sources in the SM series will work with these drivers
SML
SMT
SMR
Gigatronics
12000A
Marconi Instruments/IFR/Aeroflex
2033
2030/31/32
2040/41/42
2050/51/52
2023/24
2026 This instrument has 2 or 3 sources in one box.
6200(series) This driver uses the source section of this multi-instrument
6800(series) This driver uses the source section of this multi-instrument
Advantest
68xx (series)

Spectrum Analyzers

HP/Agilent
8560/1/2/3E This driver is compatible with many models
8590/1/2/3/4
ESA
PSA
8566/7/8B This driver is compatible with older models
4395/6 This driver uses the Spectrum Analyzer section.
70000
3585B
IFR/Marconi/Aeroflex
2309/10 These Tetra analyzers have a very accurate narrow band analyzer
2382/3/6
6800 This driver uses the analyzer section of this multi-instrument
2390
2399
Rohde and Schwarz
FSx (series)
Anritsu
MS/MSA26xx
Advantest
R3267/73
R31xx (series)
Goodwill
GSP827

Scalar Analyzers

IFR/Marconi
6501
6200
6800 This driver uses the scalar section of this multi instrument
HP/Agilent
8757C/D

Oscilloscopes

Tektronix
TDS220
TDS400 One of these drivers should work with most TEK scopes
TDS600
Agilent
54xxx (series)
Lecroy
Waverunner (series) This driver will probably work with older models (eg 95xx series)

Power Meters

Gigatronics
G8650 Native driver or use the HP437B or HP438A driver if set in compatible mode.
Marconi/IFR
6960 These power meters require external calibration data
Rohde and Schwarz
NVRD
NRP
HP/Agilent
436A
437B Single channel model driver.
438A Dual channel model driver.
EPM Modern SCPI driver, HP438A mode can also be set.
Anritsu
ML24xx series Native driver or set HP437/8 compatible mode.
Boonton
 series Set HP437/8 compatible mode.

Vector Network Analyzers

Rohde and Schwarz
ZVR (series)
ZVA/B/T
HP/Agilent
8752/3 A,B,C,D,E
8510 A,B,C,D
PNA
ENA
8719/20
8711/12/14
4395/6
Anritsu/Wiltron
360 (series)
R37xxx (series)
MS642x
Advantest
R3860
R3751/2/3/4
R3762/3
 

 

Home ] Up ]

Send mail to webmaster@arkrfsystems.com with questions or comments about this web site.
Copyright © 2003 ARK RF systems